LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS DH40 Shipbuilding steel plate

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 DH40 steel plate is a kind of steel for shipbuilding and platform.Shipbuilding steel plate DH40 is the high tensile strength steel. As a professional shipbuilding steel plate exporter, Bebon international can supply steel plate DH40. ASTM A 131 DH40 shipbuilding steel plates can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons.

DH40 Shipbuilding Steel Specification:
Thickness: 4 mm to 260mm, 
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.

DH40 steel plate Chemical Composition %


Grade

C max

Si max

Mn

P max

S max

Als min

Ti max

Cu max

Cr
max

Ni
max

Mo
max

Nb

V

DH40

0.18

0.50

0.90-1.60

0.035

0.035

0.015

0.02

0.35

0.20

0.40

0.08

0.02-0.05

0.05-0.10

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.40% (thickness ≤ 50mm). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

DH40 steel plate Mechanical Property


Grade

Rm
(MPa)

Re(MPa) min

A% min

Akv/J min

DH40

510-660

390

20

E.T °C

Thickness (mm)

0

 50

>50-70

>70-100

L

C

L

C

L

C

41

27

-

Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

DH40 steel plate Condition Of Delivery


Grade

Fine grains elements

category

The thickness of steel

≤ 12

>12.5-20

>20-25

>25-35

>35-50

>50-100

DH40

any

Plate/
sheet

N(50),CR(50),TM(50)

-

Profile steel

Note: 1. DH40 Shipbuilding steel delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

DH40 steel plate Available Specification


variety 
Thickness (mm) Width (mm) Longth/ inner diameter (mm)
Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
non- cutting edges 1300~3000
Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
non-cutting edges 1510~2010

DH40 steel plate theoretical weight


Thickness (mm) 
theoretical weight Thickness (mm) theoretical weight
Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
6 4.376 47.10 25 18.962 196.25
7 5.105 54.95 26 20.420 204.10
8 5.834 62.80 28 21.879 219.80
10 7.293 78.50 30 23.337 235.50
11 8.751 86.35 32 25.525 251.20
12 10.21 94.20 34 26.254 266.90
14 10.939 109.90 35 27.713 274.75
16 11.669 125.60 40 29.172 314.00
18 13.127 141.30 45 32.818 353.25
20 14.586 157.00 48 35.006 376.80
22 16.044 172.70 50 36.464 392.50
24 18.232 188.40      

DH40 steel plate dimensional deviation


nominal thickness(mm)
The thickness deviation with following width (mm)
≤1200 >1200~1500 >1500~1800 >1800
>6.0~8.0 ±0.29 ±0.30 ±0.31 ±0.35
>8.0~10.0 ±0.32 ±0.33 ±0.34 ±0.35
>10.0~12.0 ±0.35 ±0.36 ±0.37 ±0.43

nominal thickness(mm)

 

minus deviation (mm) The thickness deviation with following width (mm)
> 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
>12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
>25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
>30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
>34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
>40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5


Kindly send email to sales4@bebonchina.com, The professional team will support your work as one-to-one.
At last, Welcome to Visit our mill for long coopeation and checking steel quality in any time.

Henan BEBON international co.,ltd located in zhengzhou ,henan province of china. Since it was established in 2008, Henan BEBON has earned an outstanding reputation for its profession in exporting shipbuilding steel. About the products, we are mainly specialized in steel products for shipbuilding which have been products for shipbuilding which have been approved by some authoritative classification societies,likeLR,BV,ABS,DNV,GL and so on.

If you can`t find what you wanted ,Please send Email to sales4@bebonchina.com ,we will reply you ASAP!!Online Chat

  • p235gh Boiler and Pressure Vessel Steel Plate

    P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p265gh Boiler and Pressure Vessel Steel Plate

    P265GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P265GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p355gh Boiler and Pressure Vessel Steel Plate

    P355GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P355GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • s235jr Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s275j2 Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355jr Boiler and Pressure Vessel Steel Plate

    S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j0W Weather Resistant Steel Plate

    S235J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃.S235J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S235J2W. EN10025 S235J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy velue should be carried out in accordance with EN 10025-1.If agreed at the time of the order products of qualities J2 or K2 shall comply with one of the requirements of EN10164.

    Read more
  • s355j0W Weather Resistant Steel Plate

    S355J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃. S355J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more
  • a558a Weather Resistant Steel Plate

    A588GrA general 8mm ~ 200mm thick, A588 series high weathering steel bridge structures including A588GrA, A588GrB so on. Such steel by Cu, P, Cr, Ni and other alloying the metal substrate surface to form a protective layer, which has a high resistance to atmospheric corrosion.

    Read more
  • a588b Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more

If you can`t find what you wanted ,Please send Email to sales4@bebonchina.com ,we will reply you ASAP!!Online Chat